Thanks for having such good software to help me synchronize data between devices! So far, I’ve had some minor problems, which I seem to have solved, but I’d like to know why
environment
At present, I have two Windows 10 computers in my LAN with fixed IP addresses of ‘192.168.1.69’ and ‘192.168.1.248’. They are using the latest version of SyncTrayzor
XXXSorry, new users can only put 5 embedded media items in a post.XXX
At the same time, a server has set up the relay service (StrelaySRV) and discovery service (StdiscoSRV), and can be connected and used normally XXXSorry, new users can only put 5 embedded media items in a post.XXX
Hide some key information
Problem recur
After a remote device is added, it can be discovered only on the remote server, not on the LAN
Also slow (because of remote relaying) XXXSorry, new users can only put 5 embedded media items in a post.XXX
The speed is only about 8M
My solution
Set the listening address of ‘192.168.1.248’ to default, like this
It can be found on the LAN
It’s also very fast XXXSorry, new users can only put 5 embedded media items in a post.XXX
The way I tried
Failed to manually set device address ‘TCP ://192.168.1.xx:22000’ on both computers
Set the address to TCP: / / 192.168.1. Xx: 22000, the dynamic
, local area network (LAN) cannot be found, or through the relay server
Firewalls/ports/UPNP/routers firewalls have all been tried
What is this
When I check the log, I find that a port is used, and it is the address port of the device. What is it? And every restart is dynamic, can you set it to fixed?
[ZUVOV] 08:21:00 INFO: Established secure connection to IF5PN3L at 192.168.1.69:50639-192.168.1.248:22000 / TCP - client/TLS1.3 - TLS_AES_128_GCM_SHA256
原文
感谢有这么好用的软件来帮助我同步设备之间的数据!目前我遇到了一些小问题,虽然我貌似解决了,但我更想知道原因
环境
目前我在局域网内有两台win10的电脑,ip地址固定为192.168.1.69
和192.168.1.248
,他们使用的是最新版的SyncTrayzor
同时有台服务器搭建了中继服务(strelaysrv)和发现服务(stdiscosrv),并且能够正常连接使用
将一些关键信息进行了隐藏
问题复现
添加远程设备后,只能在远程服务器上进行发现,而不能在局域网中发现
同时速度会很慢(因为使用了远程的中继)
速度只有8M左右
我的解决方法
将192.168.1.248
的的监听地址设置为default,就像这样
能够在局域网中发现
速度也很快
我试过的方法
两台电脑手动设置设备地址tcp://192.168.1.xx:22000
,失败
设置地址为tcp://192.168.1.xx:22000,dynamic
,局域网不能发现,还是通过的中继服务器进行的
防火墙/端口/upnp/路由器防火墙这些都尝试过
这个是什么
查看日志的时候发现有个端口被使用了,而且正是设备的地址端口,请问它是什么的端口呢?而且每次重启都是动态的,能不能把它设置成固定的?
[ZUVOV] 08:21:00 INFO: Established secure connection to IF5PN3L at 192.168.1.69:50639-192.168.1.248:22000/tcp-client/TLS1.3-TLS_AES_128_GCM_SHA256