Announce Server Not Responding?

Support
1

A few weeks ago my clients stopped talking (my work and home desktops).

It appears my home server is unable to get a response from the global announce server (have not been able to test the work desktop). A traffic dump on the PPP side of my firewall shows the traffic heading out, but no reply coming back:

# tcpdump -lnn -i ppp200 port 22025
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on ppp200, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes
19:02:21.623481 IP x.x.221.224.54687 > 194.126.249.5.22025: UDP, length 56
19:02:21.623525 IP x.x.221.224.57111 > 194.126.249.5.22025: UDP, length 40
19:02:22.624975 IP x.x.221.224.54932 > 194.126.249.5.22025: UDP, length 40
19:02:27.625381 IP x.x.221.224.55902 > 194.126.249.5.22025: UDP, length 40
19:02:34.627274 IP x.x.221.224.44869 > 194.126.249.5.22025: UDP, length 40
19:02:43.629225 IP x.x.221.224.44966 > 194.126.249.5.22025: UDP, length 40

Am I missing something?

2

If that’s a 0.9 version it should use port 22026 instead; if it’s a 0.8 version you should upgrade. :wink:

3

Hmmm, it is 0.9 – I wonder how it got wrong. Setting held over from when I did have 0.8 perhaps? I’ll update it and see how it goes. Thanks :slight_smile:

4