# syncthing on a raspberry Pi4B

**URL:** https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690
**Category:** Support
**Created:** [August 28, 2019, 7:40am UTC](https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690 "2019-08-28T07:40:04Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![cosas](https://forum.syncthing.net/user_avatar/forum.syncthing.net/cosas/32/14159_2.png) [@cosas](https://forum.syncthing.net/u/cosas)
#### Post date: [August 28, 2019, 7:40am UTC](https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690/1 "2019-08-28T07:40:04Z")

</div>

Hi

Will the binary for Linux run on this hardware (4GB RAM)? I read the RPi’s are 32bits, so can install/updates be done as stated @ [https://apt.syncthing.net/](https://apt.syncthing.net/) ?

I’d like to set a “Receive only” Folder for about 10GB. Do you know any obstacle(s) that will make me fail ?

Thank you

---

<div class="post-metadata">

### Author: ![AudriusButkevicius](https://forum.syncthing.net/user_avatar/forum.syncthing.net/audriusbutkevicius/32/277_2.png) [@AudriusButkevicius](https://forum.syncthing.net/u/AudriusButkevicius)
#### Post date: [August 28, 2019, 8:09am UTC](https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690/2 "2019-08-28T08:09:21Z")

</div>

It should. Also, I think you can use 64bit arm version on rpi4 I believe.

---

<div class="post-metadata">

### Author: ![cosas](https://forum.syncthing.net/user_avatar/forum.syncthing.net/cosas/32/14159_2.png) [@cosas](https://forum.syncthing.net/u/cosas)
#### Post date: [August 28, 2019, 9:33am UTC](https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690/3 "2019-08-28T09:33:40Z")

</div>

Beeing a fullNewb on Rasp and halfNewb in linux, I’ll stick for a while to Raspbian which is 32bits AFAIK and I read somewhere some 64bits distros are not supported and may have bug(s?) with the GPU or video thing. Before you replied I went to wander I’d use syncthing for Android because of the ARM proc.

Thank you Audrius. Have a nice day

---

<div class="post-metadata">

### Author: ![Nummer378](https://forum.syncthing.net/user_avatar/forum.syncthing.net/nummer378/32/5958_2.png) [@Nummer378](https://forum.syncthing.net/u/Nummer378)
#### Post date: [August 28, 2019, 10:45am UTC](https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690/4 "2019-08-28T10:45:18Z")

</div>

Raspbian is a derivative of debian and as such the aptitude/apt/.deb versions will work fine on a raspberry. Installing via `apt` will take care of installing a compatible architecture.

For raspbian that will probably be armv7l (32 bits) even though the newer raspberrys have an armv8 (64 bits) processor - the official raspbian image has not changed (yet) afaik. Some day probably.

This means for syncthing that the limits of this architecture apply, e.g at most ~3GB of virtual memory can be addressed.

---

<div class="post-metadata">

### Author: ![ProactiveServices](https://forum.syncthing.net/user_avatar/forum.syncthing.net/proactiveservices/32/2386_2.png) [@ProactiveServices](https://forum.syncthing.net/u/ProactiveServices)
#### Post date: [August 28, 2019, 5:47pm UTC](https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690/5 "2019-08-28T17:47:57Z")

</div>

FYI I’m running Syncthing on that spec Pi: 66k files, 211GiB data and it handles the setup without any problems.

---

<div class="post-metadata">

### Author: ![system](https://forum-uploads.syncthingcdn.net/original/2X/0/0b50e0a202b22ae6a67190759e8c868805b8ed9f.png) [@system](https://forum.syncthing.net/u/system)
#### Post date: [September 27, 2019, 5:47pm UTC](https://forum.syncthing.net/t/syncthing-on-a-raspberry-pi4b/13690/6 "2019-09-27T17:47:59Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
