Hello, new here. I have a simple setup, one “local” and one “remote” device. Both already had the same content, in one folder - about 3.5 TB of data. I let both sides scan the folder in question and gave the same Folder ID on both sides. But the Remote Device always shows the same: Syncing (1%,…

That seems to be the wrong binary then. I suppose it’s for the GUI wrapper. You need to find the bare syncthing binary, try this: defaults read com.github.xor-gate.syncthing-macosx Executable

[image] acolomb: defaults Ohh, yes! But then, the output is irritating: syncthing: error: unexpected HTTP status returned: 403 Forbidden Debugging disabled EDIT: I found the “Debugging” option in the webinterface, now it works!

Here is the modified output, I changed all string that I was not sure about putting them in public: { "availability": [ "<NUMBERS>" ], "global": { "blocksHash": "hQ/aqX4HRCcs9qcwj/yU7Bf+FuUpvDPdQ2NzPWdTgAU=", "deleted": false, "ignored": false, "inodeChange": "2024-11-17T2…

Well you need to acquire this info on both devices and then look for differences.

OK, I will try to get this from the remote site. But then … this is from the local device and it says that this file is out of sync! And the local device shows the local and the global state - and they are equal in regards to file size, checksum, permission. modification date and so on. As the lo…

The global state is reconstructed on each device from what it knows and what has been announced from other devices. In this case, your receive-only device does not announce its state (which is the meaning of receive-only), thus that view is not part of the global state that your send-only device ca…

Thanks for the explanation! New version with availability numbers (data from the remote site only later, I cannot access it myself): { "availability": [ "7777777-777777N-7777777-777777N-7777777-777777N-7777777-77777Q4" ], "global": { "blocksHash": "hQ/aqX4HRCcs9qcwj/yU7Bf+FuUpvDPdQ2N…

I don’t get why you don’t feel like hitting the revert button, but just resetting everything seems to be perfectly acceptable risk… Also have you set ignore permissions on both sides? I feel like a parrot for repeating that, but really it’s a no-brainer super simple change that might solve things a…

Hi Simon, I simply fear that the remote data could somehow be invalidated and need to be uploaded again. If you can guarantee that no remote or local data will be changed or rescheduled for upload, I can try the revert button - but I heavily fear some thing bad may happen, not knowing how this work…

From the “local” site: { "availability": [ "7777777-777777N-7777777-777777N-7777777-777777N-7777777-77777Q4" ], "global": { "blocksHash": "hQ/aqX4HRCcs9qcwj/yU7Bf+FuUpvDPdQ2NzPWdTgAU=", "deleted": false, "ignored": false, "inodeChange": "2024-11-17T21:46:47.02+01:00", …

Syncthing Community Forum

Remote Device always shows "Syncing"

Support

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled