# Fix or ignore? Malformed device description warnings

**URL:** https://forum.syncthing.net/t/fix-or-ignore-malformed-device-description-warnings/17735
**Category:** Support
**Created:** [December 16, 2021, 6:29pm UTC](https://forum.syncthing.net/t/fix-or-ignore-malformed-device-description-warnings/17735 "2021-12-16T18:29:06Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![subricky](https://forum.syncthing.net/user_avatar/forum.syncthing.net/subricky/32/11197_2.png) [@subricky](https://forum.syncthing.net/u/subricky)
#### Post date: [December 16, 2021, 6:29pm UTC](https://forum.syncthing.net/t/fix-or-ignore-malformed-device-description-warnings/17735/1 "2021-12-16T18:29:07Z")

</div>

> Dec 16 13:19:26 rbp-xfr1 syncthing[258601]: [SATWG] INFO: [http://192.168.0.11:48135/rootDesc.xml](http://192.168.0.11:48135/rootDesc.xml) - malformed InternetGatewayDevice description: no WANDevices specified. Dec 16 13:19:26 rbp-xfr1 syncthing[258601]: [SATWG] INFO: UPnP parse: [[http://192.168.0.11:48135/rootDesc.xml](http://192.168.0.11:48135/rootDesc.xml)] Malformed device description: no compatible service descriptions found.

Is this something I can fix or is this something I should ignore?

---

<div class="post-metadata">

### Author: ![bt90](https://forum.syncthing.net/user_avatar/forum.syncthing.net/bt90/32/18565_2.png) [@bt90](https://forum.syncthing.net/u/bt90)
#### Post date: [December 16, 2021, 7:38pm UTC](https://forum.syncthing.net/t/fix-or-ignore-malformed-device-description-warnings/17735/2 "2021-12-16T19:38:23Z")

</div>

Does your router allow opening ports via UPnP?

---

<div class="post-metadata">

### Author: ![subricky](https://forum.syncthing.net/user_avatar/forum.syncthing.net/subricky/32/11197_2.png) [@subricky](https://forum.syncthing.net/u/subricky)
#### Post date: [December 16, 2021, 8:29pm UTC](https://forum.syncthing.net/t/fix-or-ignore-malformed-device-description-warnings/17735/3 "2021-12-16T20:29:43Z")

</div>

no. using opnsense firewall and we don’t allow unpnp. Eventually we will move the device to a DMZ where we can open a port.

I found [this](https://forum.syncthing.net/t/disable-upnp-instructions/8684) on disabling unpnp. I assume since we allow relaying there shouldn’t be a problem.

---

<div class="post-metadata">

### Author: ![bt90](https://forum.syncthing.net/user_avatar/forum.syncthing.net/bt90/32/18565_2.png) [@bt90](https://forum.syncthing.net/u/bt90)
#### Post date: [December 17, 2021, 7:33am UTC](https://forum.syncthing.net/t/fix-or-ignore-malformed-device-description-warnings/17735/4 "2021-12-17T07:33:13Z")

</div>

The logoutput boils down to “upnp didn’t work” so that’s expected.

---

<div class="post-metadata">

### Author: ![system](https://forum-uploads.syncthingcdn.net/original/2X/0/0b50e0a202b22ae6a67190759e8c868805b8ed9f.png) [@system](https://forum.syncthing.net/u/system)
#### Post date: [January 16, 2022, 7:33am UTC](https://forum.syncthing.net/t/fix-or-ignore-malformed-device-description-warnings/17735/5 "2022-01-16T07:33:52Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
